Has anyone bought from here before? Looking to upgrade my NAS drives.

      • @InternetUser2012@midwest.social
        link
        fedilink
        English
        -29 months ago

        It’s “refurbed” by the seller. It also says it has approximately 35,000 hours on it. That’s 4 years of continual use. I wouldn’t trust that with anything.

          • @toddestan@lemmy.world
            link
            fedilink
            English
            2
            edit-2
            9 months ago

            It certainly could. That’s the gamble you’re taking.

            I usually replace drives after 5 years if they are doing anything I consider important. So those drives to me would have 1-2 years left in them. Of course, I have seen a good number of drives I have repurposed to things less important still manage to rack up impressive numbers of hours.

            • @Trollception@lemmy.world
              link
              fedilink
              English
              19 months ago

              I’m running Raid z2;and have considered even z3 which should be plenty of redundancy for older drives. Well that and backing up data to a separate location.

          • @randomaside@lemmy.dbzer0.com
            link
            fedilink
            English
            19 months ago

            Depends on the usage. That’s the gamble you take. I would maybe buy three and put two in a mirror and keep the third one as a replacement?

            That’s 240$ for three drives without warranty though… Nevermind I’d prefer to buy two new Toshiba X300 new for 210$ a piece and forget the headache and get the warranty.

            Sometimes you get what you pay for … Sometimes

            • @Trollception@lemmy.world
              link
              fedilink
              English
              09 months ago

              The Toshiba x300 is a consumer drive, the drive they are offering is an enterprise grade storage drive. I have only bought enterprise or nas speed drives in the past. Consumer drives may not be built to the same standards.

  • @Apollo2323@lemmy.dbzer0.com
    link
    fedilink
    English
    209 months ago

    I just bought two of their 12TB for $100 each and they were the manufactured recertified. One had like 8 hours run time and the second had like 36 hours so brand new for the lifetime of a hard drive. So far no issues. Also beware these drives are very loud.

      • @Apollo2323@lemmy.dbzer0.com
        link
        fedilink
        English
        19 months ago

        Yeah I think that’s normal , I moved my NAS to a closet because of how loud the drives are. I wasn’t even able to sleep with that noise lol

    • Solar Bear
      link
      fedilink
      English
      239 months ago

      Refurbished drives get their SMART data reset during the process, they absolutely had more than that originally.

          • yeehaw
            link
            fedilink
            English
            79 months ago

            Hang on, you don’t typically buy your cars at 15Km/h?

          • Spectranox
            link
            fedilink
            English
            39 months ago

            You’d better hope that be pretty close to zero before attempting repairs.

        • @ashok36@lemmy.world
          link
          fedilink
          English
          99 months ago

          That’s why you run a couple rounds of preclear to stress them and then run a fresh smart report.

        • @BCsven@lemmy.ca
          link
          fedilink
          English
          59 months ago

          Amazon reseller for xbox drives was getting 10 year old dirty crusty drives and swapping the HD controller to a more recent one. So SMART report looked like a young drive. Xbox casing had a sticker or warranty void. So me being me wondered and opened it to find a dirty ass old drive inside. i called Amazon and initially they said it is outside of return window and warranty…But i explained it doesn’t matter when I detected the fraud it is still fraud. So they gave me my money back

          • @jkrtn@lemmy.ml
            link
            fedilink
            English
            19 months ago

            This has got me concerned, wondering how do you tell it’s old if the controller is replaced? Are there serials or dates on the other parts or just obvious wear?

            • @BCsven@lemmy.ca
              link
              fedilink
              English
              29 months ago

              For the ones I had, the corrosion of the metal and stained labels was the give away (looked like they had been out on an autoshop repair bench), but each part had its own label dates. HDD was way older date than the controller board.

      • @Apollo2323@lemmy.dbzer0.com
        link
        fedilink
        English
        39 months ago

        I think there is a difference on Refurbished drives and Manufactured recertified. On server part deals the prices were different and manufactured recertified being a little more expensive for the same drive. So I assumed the drives were send back from a data center and tested again but they cant be spelled as new.

      • yeehaw
        link
        fedilink
        English
        19 months ago

        Don’t use raid 5. It hasn’t been recommended for like a decade. Use 6 at minimum if you value your data.

  • @Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    13
    edit-2
    9 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    NAS Network-Attached Storage
    RAID Redundant Array of Independent Disks for mass storage
    SSD Solid State Drive mass storage

    [Thread #677 for this sub, first seen 13th Apr 2024, 01:25] [FAQ] [Full list] [Contact] [Source code]

  • @daniskarma@lemmy.world
    link
    fedilink
    English
    199 months ago

    I really wish we had a service like this on Europe.

    I know they ship to Europe. But shipping costs are prohibitive for small buys.

      • @TropicalDingdong@lemmy.world
        link
        fedilink
        English
        39 months ago

        No issues what’s so ever. Have them in a four drivE QNAS. I was a bit concerned about them being cheaper drives initially but after I got them installed I literally haven’t thought about them again in terms of reliability.

        0 complaints and they seem to be doing about as well as some more expensive drives might be.

          • @TropicalDingdong@lemmy.world
            link
            fedilink
            English
            09 months ago

            I mean, I don’t know your use case, but as a self-hoster/ research scientist, I think my usage is much much. And I do rely on mine for business, as my wife and I both rely on it for hosting our data, which for me is large geospatial datasets, and when I’m doing large compute runs, there are many many read writes. We also store a large amount of music/ videos for streaming and running a jelly fin server. Thats been fine as well. I think since in our case we don’t have a ton of people hitting the server at once, its just never as stressed as it might be in a corporate/ multi user environment.

            • @Mir@programming.dev
              link
              fedilink
              English
              19 months ago

              Thank you, I also know it’s a lottery and hopefully I get a nice unit.

              I’m going to use it solo as a home server to sync, store and read data. And eventually as a streaming server for jelly fin too, mostly for myself only too.

    • @dogma11@lemmy.world
      link
      fedilink
      English
      139 months ago

      Refurbished drive. I’ve had 4 white label drives running for a number of years without issue, planning on eventually getting 12 more and maxing out my servers.
      Unfortunately that’s years down the line :(

    • @BillDaCatt@lemmy.world
      link
      fedilink
      English
      43
      edit-2
      9 months ago

      These are used drives that have about 35K hours (4 years) of power on time.
      Good quality drives to be sure, but maybe not as reliable now as they once were.

    • @Grntrenchman@sh.itjust.works
      link
      fedilink
      English
      79 months ago

      2nd catch, behind the power on time: PWDIS drives: if you’re not using them somewhere with sata 3.2/3.3, you need to use an adapter for the power plug, or some tape, to block pins 1-3 (3.3v) as supplying it to these causes them to reset. Might be worth doing the taping anyway, if you’re using an enclosure or cage (where you can’t use the adapters)

      • @ChapulinColorado@lemmy.world
        link
        fedilink
        English
        99 months ago

        They are also enterprise drives which consume slightly more power and more importantly generate more noise/clicking sounds on average when compared to a consumer drive. Depending on where you were planning to install them, it might not be the best option.

        • Corgana
          link
          fedilink
          English
          29 months ago

          They generate a LOT of noise. Not a dealbreaker for most but something to be aware of for sure.

        • @HakFoo@lemmy.sdf.org
          link
          fedilink
          English
          49 months ago

          I have a similar one, different seller and possibly submodel, but also a refurb HGST 12T enterprise drive. It sounds like I left a soda on my desk most of the time, subtly popping and ticking.

  • @proper@lemmy.world
    link
    fedilink
    English
    449 months ago

    the drives I’ve purchased from them in the past have been great considering they’re used server parts.

    • @givesomefucks@lemmy.world
      link
      fedilink
      English
      24
      edit-2
      9 months ago

      considering they’re used server parts.

      That really should be in the title…

      I dunno, I’m one of those people who never stops using a drive until it breaks, and they never really break anymore. Oldest in my current PC is probably 20 year old HDD.

      So yeah, these probably are fine and will still last a long time. But for like $20 more you don’t have to worry about losing the data on it.

      Edit:

      Apparently prices just haven’t changed in half a decade or longer? I knew prices went up for COVID, assumed they went back down at some point.

  • chiisana
    link
    fedilink
    English
    1079 months ago

    Approx 35k power on hours. Tested with 0 errors, 0 bad sectors, 0 defects. SMART details intact.

    That’s about 4 years of power on time. Considering they’re enterprise grade equipment, they should still be good for many years to come, but it is worth taking into consideration.

    I’ve bought from these guys before, packaging was super professional. Card board box with special designed drive holders made of foam; each drive is also individually packed with anti-static bags and silica packs.

    Highly recommend.

      • chiisana
        link
        fedilink
        English
        19 months ago

        Pretty sure that’s the usual preventive wear clicking sound that’s just part of newer drives’ design…?

    • @jkrtn@lemmy.ml
      link
      fedilink
      English
      19 months ago

      Came here to ask about the hours. Some quick searching looked like 5 years is an average time to failure, but that might have been for lower-grade hardware?

      • chiisana
        link
        fedilink
        English
        59 months ago

        Backblaze has drives with very similar models in service, has an annualized failure rate of less than 1% on average, and have been in service for 5 years. The average age will continue to rise as usage time continues to rack up.

      • chiisana
        link
        fedilink
        English
        89 months ago

        This is pretty standard for enterprise equipments — comes with some amount of years of warranty, enterprises depreciate the cost over that many years and sell them as/before the warranty expires to get whatever value they can get (as far as books concerned, they’re already depreciated to $0 anyway).