They’re like that in this apartment we’re renting and I keep seeing them elsewhere. I don’t get it.

  • cooljimy84
    link
    fedilink
    213 months ago

    Being a uk person its cause they can & its also in to building / electric code. Its just a switch that breaks the live leg, stops sparking when plugging in stuff.

      • Skua
        link
        fedilink
        93 months ago

        No, unless something is very wrong. I don’t know if that was maybe a bigger problem with older devices though. I remember being taught to turn the socket off before plugging things in or taking them out when I was a kid

      • Flying SquidOP
        link
        fedilink
        173 months ago

        I’ve definitely had that happen to me, sort of at random, in the U.S.

        But it doesn’t seem to have any effect. It’s not like a gigantic spark and it’s pretty contained.

          • Log in | Sign up
            link
            fedilink
            43 months ago

            Home electricity in North America has roughly half the voltage as elsewhere in the world, and double the voltage is double the arcing potential, so that figures.

          • @Fermion@feddit.nl
            link
            fedilink
            83 months ago

            Laptop power bricks is probably where I see it most. Or if you plug in something with a motor already switched on. Listen for a soft popping noise if you plug in a big power brick.

            • Log in | Sign up
              link
              fedilink
              13 months ago

              You’re right, now that I think about it. Laptop power does it more than anything else.

              • @cecilkorik@lemmy.ca
                link
                fedilink
                English
                33 months ago

                Many, many big power-smoothing capacitors inside those jumping from 0 to 120V in a microsecond, that’s why. The better-smoothed the power supply, the more capacitors and the bigger the sparks tend to be, although some really high quality ones put most of them behind inrush-current limiters to reduce the sparking, but that can also marginally reduce efficiency. High power electronics are always a bit of a tradeoff. The problem is that capacitors charge and discharge almost instantly in most cases, and when empty they act like a short circuit until they’re filled, so they can create some pretty big sparks, even though the actual energy going in is minuscule by any reasonable measurement. It’s almost like a static shock, huge spark, tiny energy.

                Some motors will also spark badly when disconnected, but the reason is slightly different. They have a huge electromagnetic field which suddenly fills or collapses and that inductance in the coils can draw a lot of amps on startup and generate some pretty high voltages, more than enough to spark across the gap. Like the capacitors, they are very nearly a short circuit until they start moving.

      • bluGill
        link
        fedilink
        63 months ago

        All will if there is a load. Doesn’t matter ac of dc or even load. Plug an ethernet cable in and there will be a spark.

        Most of the time the spark is tiny and you need a good lab to measure it though.