Geekworm offers a HAT and an enclosure for 2HDD and the Pi, that might suit you

Wtf I didn’t know that there is a clear reason for corpos getting political! Thank you for this, I really had no idea about it!

Might be the case but is this really a problem to solve? To my knowledge, all modern boards support wol.

My bad, I just looked up what a CUV is and you are totally right. I’d go even further and say that there are barely any real “SUVs” around from European car makers, seems like the CUV label fits pretty much all of them (with few exceptions, usually the big ones like Audi Q5+, BMW X5+, VW Touareg). So I learned sth today, thanks!

Similar reason for me. Although, as long as I could get a car without internet connectivity, I would even be fine with non-free software but even that is too much to ask nowadays. This also applies to gas or diesel powered cars though, so I will stick with my sedan from 2015 too, might even have the engine redone completely in a few years if there are no proper options by then.

Is this a US take? Serious question because in Europe, I see primarily SUVs being sold when it comes to EVs. Small and shitty ones yes, but still aiming to resemble at least the SUV look. E.g. VW ID3, ID4; these I see a lot on the streets over here. Big exception seem to be hybrids, they usually are sedans or hatchbacks.

Okay, then it simply has an issue with the addresses you are providing, as someone pointed out already, the issue likely is the 192.168.100 network. Find out where exactly you define localhost and 192.168.100.1 as addresses to listen to and change them to e.g. 0.0.0.0 and 127.0.0.1 instead (or ideally just 0.0.0.0 as this includes localhost as well). Restart the container afterwards, see if it works. Of course make a backup of your config first so you can go back.

I don’t see anything like that in this thread. If you want people’s help, help them help you and provide sufficient information about your problem.

Yes, have it running and it works well. Nextcloud setup is sth that I will still have to set up but the only problem I see there is certificates. To debug Nebula, simply try executing it by hand, e.g. nebula --config /path/config.yml and see what the error message is. Or check your journalctl of course. Share the message here and we can have a look!

When you issued the netstat command, were the containers up or down? Issue it again after docker-compose stop. If you moved or renamed the compose file, the old conrainers would still run in the old context.

Very nice! I am running an HC4 (I think; the toaster) now since last month and so far, it’s running much better than I thought! So yes, check that one first, then see if you have to upgrade and if you do, go for aarch64 or traditional x64 but not 32 bit arm

Alternatively, there are also some options from pine64.com, maybe scroll through there! Same for odroid.nl

Native tool, not the web. So far, I have not felt the need to use anything else; calibre does decent management and connects to my koreader installations on ebook readers, while the abs app handles all interactions with phones. The latter has good wife-approval but the syncing through calibre to readers is complex and not super reliable, so it still requires “admin intervention”

Yes. Let me give you an example on why it is very nice: I migrated one of my machines at home from an old x86-64 laptop to an arm64 odroid this week. I had a couple of applications running, 8 or 9 of them, all organized in a docker compose file with all persistent storage volumes mapped to plain folders in a directory. All I had to do was stop the compose setup, copy the folder structure, install docker on the new machine and start the compose setup. There was one minor hickup since I forgot that one of the containers was built locally but since all the other software has arm64 images available under the same name, it just worked. Changed the host IP and done.

One of the very nice things is the portability of containers, as well as the reproducibility (within limits) of the applications, since you divide them into stateless parts (the container) and stateful parts (the volumes), definitely give it a go!

I’m currently using Calibre and Audiobookshelf, where the latter is basically just using the folder structure of Calibre with and additional folder for some audiobooks. Works okay but is not the greatest solution. The calibre library web interface is quite nice (not the weird VNC-style admin panel, the one on other port). People also mention lazylibrarian a lot but I never tried it.

Great question, from my understanding, notifications through private nextcloud or ntfy instances should be safe but I just started looking into this a month ago, so let’s wait for someone more knowledgeable to join in here.

I say this time and time again; only listen to people regarding their field of authority. For anything outside the world of software, Stallman’s opinions should not be seen any more valid or important than any other person on the internet. We should stick to that more. (What happened/happens due to his position in the FSF is a different topic)

You can run lineageOS on it though; problem solved

Are you sure you installed all the drivers from https://www.dell.com/support/home/en-ie/product-support/product/optiplex-3060-desktop/drivers ?

Not at all, Windows 10 and beyond identify your hardware composition, so as long as you don’t swap the mainboard, the license is automatically applied again upon internet connection (assuming you install the same windows version and do not enter another license key during installation). If you want to transfer your data though, get a cheap external USB HDD enclosure and use clonezilla to clone the drive. Edit: typos